Custom Teardrop Banner




Product Features & Benefits

  • Unique teardrop shape
  • Assembles in under one minute
  • No tools required
  • Lightweight, portable and durable
  • Single or Double sided printed options
  • Simple ratchet system for adjusting the tension of the banner
  • Patented "Quick Connect" system for added stability
  • UV Resistant
  • Windproof
  • Washable and colorfast
  • Fabric can be ironed
  • Commercial grade fiberglass poles
  • Carry bag included
  • Optional ground stake or hard surface base for mounting

Artwork Guidelines

If you are using your own pre-designed artwork please ensure you pay close attention to the following artwork guidelines

Design Templates

Design templates for each of the available sizes can be downloaded here.


Pantone Colors: For accurate color matching, we highly recommend Pantone colors over CMYK mixes (especially for corporate logos). Convert CMYK to Pantones wherever possible.

All desired colors need to be specified. Do not use generic colors such as "green" from Illustrator. Also, do not change the color label name of the Pantone color.

CMYK Colors: Exact color matches are not always possible particularly with CMYK. Please understand that there may be color variations & that the finished banners cannot be rejected on the basis of the color being wrong.

What you see on the computer screen (with CMYK and Pantones) is not always how the color will look when printed. Accurate matching should take place with a Pantone Guide or a color printout

Please note: Due to the nature of digital printing, we cannot print gold or fluorescent pantones (in the 800 guide numbers). Below is a list of alternative gold and silver colors, which will print satisfactorily: Silver and Gold

Images and File Types

All photos/jpg or PSD images must be created at a resolution of at least 72ppi/dpi at 100% print size or at a maximum of 100ppi at 100% print size. Sending 300ppi/dpi images is not necessary and not recommended as the files tend to be huge and are more difficult/time-consuming to work with.

Scans - color: Convert to CMYK or Grayscale unless the file is a raster EPS that contains pantones. No RGB color.

If you are uploading complicated artwork that has already been created as a layered Photoshop PSD file, then please send that file with a maximum of 5 layers at a resolution of 72ppi so we can alter if necessary.

Whenever possible, do not upload PSD files that have layers in them, always upload a flattened PSD or JPG file.

GIFS do not have a high enough resolution for Banners, nor do PNG files generally.

JPEGS with file sizes smaller than 20mb are not usually suitable for banners where the image is to cover the entire background of the banner due to their low resolution.

TIFFS are acceptable, but typically have a huge file size, if at all possible please use JPEGS instead.

Vectored Artwork

Please do not supply raster/scanned artwork for logos/artwork that would have been created as vector illustrations.

Typographic logos and related images need to be saved as outlines in the vector format to ensure optimum print quality.

Fonts: Please convert to paths/curves/outlines.

Bleeds: If your design contains a background image or solid color please ensure you set up your file with a 2-3" bleed as indicated in the downloadable templates.

Product Information